Proper Excavator Operation
- Earthmoving projects pose a variety of dangers to excavator operators
- Preliminary inspections and operating guidelines can help improve safety on the jobsite
Assess the ground
Before beginning work, inspect the jobsite for debris, loose soil, holes/ditches, inclines, and other obstacles. Hidden obstacles can cause your machine to slide or result in damage to its components. If the machine catches an edge near any sort of incline or decline, tipping over is possible.
Choose proper attachments
Follow the manufacturer's recommendations for what attachments are suitable to use on your machine to accomplish the required task. Oversized or heavy attachments can compromise the swing motor, resulting in the machine's tipping over or shutting down.
Inspect the adjuster valve frequently
Visually inspect your adjuster valve periodically to make sure it is working properly. If the valve shows signs of leakage, bring your machine in for repair as soon as possible.
Check fuel levels
Check the fuel level before beginning work. Low fuel levels can shut down an excavator unexpectedly, causing a potentially dangerous and unstable situation.
Never overload the bucket
Understand your machine's load limits, and do not exceed them. Overloading can cause loss in stability and potential tip-overs.
Do not undercut
An undercut occurs when an operator digs the ground beneath the excavator tracks. Always be aware of the location of the lip of the hole that is being created to avoid a cave-in.
Monitor your track position at all times
When working on any incline or decline, make sure your tracks are pointing up and down the slope to maintain a stable center of gravity at all times. Your tracks should never be parallel to the slope, as this position distributes the weight of the machine unevenly and can cause a rollover.